WILO 2121202 VEROLINE IPL 40/130-2,2/2.
The Wilo Veroline IPL 40/130 is a single stage, low pressure centrifugal in-line pump. The pump is used for pumping heating water in accordance with VDI 2035, cold water and water/glycol mixtures without abrasive substances in heating, cold water and cooling systems.
The pump is glanded with an in-line design with flange connection, mechanical seal, motor with one-piece shaft and a high resistance to corrosion thanks to the cataphoretic coating.
Pump Specification
- Minimum efficiency index (MEI): 0.7
- Permitted fluids: Water
- Pipe connection: DN 40
- Port-to-port length: 320mm
- Maximum operating pressure (PN): 10 bar
Motor Data
- Motor efficiency class: IE3
- Mains connection: 3~400 V, 50 Hz
- Voltage tolerance: ± 10%
- Rated power P2: 2.20 kW 4.50 A
- Protection class motor: IP55
- Insulation class: F
- Integrated full motor protection: Special version with PTC thermistor sensor (KLF) at additional charge
Pump Materials
- Shaft: Stainless steel (1.4021, X20Cr13)
- Lantern: Cast iron (5.1301, EN-GJL-250)
- Pump housing: Cast iron (5.1301, EN-GJL-250)
- Impeller: Plastic (PPE+PS-GF30)
- Mechanical seal: AQEGG
The WILO 2121202 VEROLINE IPL 40/130-2,2/2 is a genuine, brand new Wilo product, covered by a Wilo manufacturer's guarantee.
Not what you're looking for? Try our unique Spares Finder tool or you can view all Wilo products.
For advice on this or any product, please call us on 0330 123 3707, email us at web@dhsspares.co.uk, or see additional ways to contact us here.
