WILO 2121245 VEROTWIN DPL 40/130-2,2/2 IE3 PUMP.
The Wilo VeroTwin 50/130-2,2/2 Pump is a glanded single-stage, low pressure in-line double pump which is used for pumping heating water, cold water and water/glycol mixtures (which do not contain abrasive substances) in heating, cooling and cold water systems.
The VeroTwin pump offers a high standard of protection against corrosion due to the cataphoretic coating whilst its space saving design, due to the double pump configuration, makes it easier to install and it provides both main/standby mode or peak-load operation by means of an external auxiliary device.
Pump Specification
- Minimum Efficiency Index (MEI): 0.7
- Permitted fluids: Water
- Pipe connection: DN 40
- Port-to-port length: 320mm
- Maximum operating pressure: 10 bar
Motor Data
- Motor efficiency class: IE3
- Mains connection: 3~400 V, 50 Hz
- Voltage tolerance: ±10%
- Rated power P2 2.20 kW 4.50 A
- Protection class motor: IP55
- Insulation class: F
- Integrated full motor protection: Special version with PTC thermistor sensor (KLF) at additional charge
Pump Material
- Shaft: Stainless steel (1.4021, X20Cr13)
- Lantern: Cast iron (5.1301, EN-GJL-250)
- Pump housing: Cast iron (5.1301, EN-GJL-250)
- Impeller: Plastic (PPE+PS-GF30)
- Mechanical seal: AQEGG
The WILO 2121245 VEROTWIN DPL 40/130-2,2/2 IE3 PUMP is a genuine, brand new Wilo product, covered by a Wilo manufacturer's guarantee.
Not what you're looking for? Try our unique Spares Finder tool or you can view all Wilo products.
For advice on this or any product, please call us on 0330 123 3707, email us at web@dhsspares.co.uk, or see additional ways to contact us here.
